Blocked Drains Melbourne

A blocked drain shows several signs. These include slow-draining water, gurgling noises from your pipes, or water backing up in sinks, bathtubs, or toilets. If you notice any of these, it’s a strong indication that your drain is blocked and needs attention.

If your drain is blocked, the water will drain slowly or not at all. However, if the drain is damaged, you will notice leaks, foul smells that persist even after clearing a blockage, or water backing up even after attempting to clear the drain. We can inspect your system with a drain CCTV to determine if the issue is a blockage or pipe damage.

Yes, a blocked drain can affect your water pressure. When the flow of water is obstructed, it can lead to a buildup of pressure in the pipes, causing water to flow slowly.

You will notice wet patches or uneven ground in your yard, where tree roots have likely grown into the pipes, causing blockages and leading to soil disruption from water leakage or shifting pipes.

While chemical drain cleaners are effective in clearing minor blockages, they can also damage your pipes over time, especially older pipes. Additionally, the chemicals can be harmful to your health and the environment. It’s better to call us for safe and long-lasting solutions.

If you accidentally flush a foreign object down the toilet, try to stop it from going further down the pipe by turning off the water supply to the toilet. You can then use a plunger to pull the object or, in more severe cases, contact us to retrieve it without causing damage to your pipes.

To prevent blockages in your kitchen sink, avoid pouring grease, oil, or large food scraps down the drain. Use a sink strainer to catch food debris, and regularly flush the drain with hot water (not boiled) to keep it clear. You can also use a natural drain cleaner, such as baking soda and vinegar, to maintain healthy pipes.

Drains should be cleaned at least once a year to prevent blockages. However, if you experience frequent clogs or have older plumbing, more frequent maintenance is necessary.

High-pressure water jetting is an effective method for clearing stubborn blockages, as it uses a powerful stream of water to break up debris, grease, and even tree roots. It’s non-invasive, doesn’t involve chemicals, and cleans the entire pipe, leaving it free from buildup. It’s ideal for both residential and commercial drains.

The time it takes to clear a blocked drain in Melbourne depends on the severity and location of the blockage. Minor blockages can usually be cleared in an hour or two, while more complex issues could take longer. We will give you an estimate after assessing the situation.